About BurakOzkan

BurakOzkan · 12-04-2016

Hi everyone, I'm running into this issue I can't seem to solve. So I have a Cisco 800 series router deployed that is handling pretty much everything for a small business environment. Setup a VPN connection to one of our branches (up and running). H...

BurakOzkan · 09-19-2016

Hello all, I had a question regarding the configuration of VPN tunnels on a Cisco router (I use a 800 series, small business). So, our current router (Zyxel) has a WEB Gui and the configuration is as following: VPN name = A Site to site Primary pee...

BurakOzkan · 05-27-2016

Hi everyone, So recently our company has purchased a Cisco C881. I've loaded CP Express on it just in case because I'm still learning to work with the CLI. I've configured a static WAN interface (fixed speed at 100Mbps Full Duplex) just like on our ...

BurakOzkan · 05-23-2016

So I was trying to upload CCP onto my Cisco router, using this tutorial: http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_configuration_professional_express/v3_1/guides/adminguide/CCP_admin_guide/installing_ccp_express_adminview.html I use my own...

BurakOzkan · 05-12-2016

Hello everyone, Let me start by saying I've searched high and low to find answers to my questions but just could not find the relevant one. So here it goes: I am not very familiar with Cisco products. I have some knowledge and experience with config...

BurakOzkan · 12-04-2016

I see, so this is my current NAT/ACL config: ip nat pool [name] [27.xx.xx.xx 27.xx.xx.xx] netmask 255.255.255.252ip nat inside source list 100 pool [name] overload These are my ACL's access-list 100 permit ip any anyaccess-list 110 permit ip 10.xx...

BurakOzkan · 05-29-2016

Hi Tim, I've deleted the fastethernet 4 route like you said. The one with: 0.0.0.0 0.0.0.0 [ISP default gateway] is still enable though, should I delete that one as well? Still unclear on what this exactly does? I put in the show ip route and got th...

BurakOzkan · 05-18-2016

Hi, Your help has been very useful. I decided to go with the CLI, still learning but it's going great. I managed to configure the WAN port correctly. The default Vlan1 is assigned to interface port FE0 (this is also where I can configure the route...

BurakOzkan · 05-12-2016

A hero you are! This helped me greatly, first thing I'm going to do in the morning is set it up. Hopefully it will all work. Really encouraging to go and start taking some classes. I mostly work with GUI's so this is very new stuff. The manual said t...

BurakOzkan · 05-12-2016

Good to know, really you are helping me a great deal here! - So destination and subnet I can leave just at zeroes, only the DG needs adjusting. How about DNS? Our ISP is providing us with a DNS, where to put that in and how? - Well technically our ...

Member Since	‎05-12-2016 09:40 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	11

User Statistics

User Activity

Disable NAT for VPN traffic

IPSec VPN

Cisco 800 series - Slow internet?

Cisco CP Express

Configuring Cisco 881

I see, so this is my current

Hi Tim,

Hi,

A hero you are! This helped

Good to know, really you are