Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
What are the models of your HP switches and versions? We need to first confirm if your HP Procurves are capable of layer 3 switching.
Note that if you take this path, you should expect an outage. Your switch will become the new default gateway ...
Hi brockwittrock,
You can do it the way Richard suggests as well by adding another cable as an access port on VLAN 20. This will meet your network requirements.
The method I suggested will also meet your network requirements and is a scalable solut...
Hi,
You can just configure another sub-interface on Gi0/0 for VLAN 20 so you don't have to add another cable. You can use the following guide as an example if you need: http://www.internetworkingcareer.com/ccna/configure-router-stick/
The example t...
Yes, that would accomplish what you want.
Though if you wanted to lock things down further, your access-list could be more specific and only allow what is required. For Internet, it would be tcp/80 and tcp/443. And udp/53 (DNS) depending on what you...
