Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Have a customer that wants to whitelist specific youtube videos with the specific youtube URL such as https://youtube.com/xyz...
Anyone know if this is possible?
Can you exclude network traffic from being processed by the sensor so that it doesn't impact the load on the appliance? For example, if you have an 5G appliance with 10G ports inline with a network and you want to only process certain traffic. Can yo...
I configured a manual after-auto NAT entry in an ASA that looked like this:object-group network INTERNAL_SUBNETS network-object 10.0.0.0 255.0.0.0 network-object 192.168.0.0 255.255.0.0 network-object 172.16.0.0 255.240.0.0nat (inside,outside) after-...
I have set this up on pre 8.3 code and 8.3 code as well. I have the following configured on the ASA, but it is not working and I am not seeing the ASA trying to NAT the VPN pool IP address that the client gets assigned. object network VPNPool subnet ...
Does the Ironport support LDAP authentication with Single Sign-On. Or, is it only supported on NTLM? Can you setup multiple authentication realms to the same AD server, but call different AD groups? What I am trying to accomplish is to have single si...
Julio, thanks for the response. I understand what you are saying, but that is not what I am trying to figure out. I am trying to determine if there is a way to determine which NAT statement is tied to a certain object groups such as the example I gav...
I have never seen the NAT satement actually shown as under the network object when viewing the running configuraiton. It has always been outside the object group area and in the NAT configuration area. Also, my question is pertaining to creating NAT...
Eric, thanks so much for the information the link provided the knowledge I was looking for. I do have an additional question though. I am deploying the WSA using WCCP on the ASA. The configuration guide states that the L4TM should be placed ahead of ...
Rama, that is what I wanted to confirm. I thought that was the case as I thought I remembered studying that, but couldn't remember. Thanks for the clear answer!
I understand that there will be two LLQ's, but I am wondering who is going toget queued first. For instance,assume the link is saturated and the priority queues are guaranteeing the 512 and 1024 each. The video traffic sends a large amount of data an...
