Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi !We would like to check if this feature is available in the Cisco Blocker. Thanks in advance and appreciate your kind help!Best regards,Fidel Serrano
Hi!Just have some questions on IP routing for the C4948. We have to set an IP address for all of VLAN interfaces (numbering around 1500) using static route towards an upper Network, question is, How many static routes maximum can be configured for t...
Hi!I'm not sure I ran the correct acl permit statements to enable https on the Cisco PIX 506E. I'm testing a proxy server which is connected to the Cisco PIX 506E. From a browser, I'm able to successfully view web pages, however, for all https prot...
Hi!Is it possible to connect AIR-LAP1242AG-S-K9 Access Points to an existing WLC-4402-25-K9 which are populated with AIR-LAP1242AG-A-K9? The difference is in the "S" and "A" in the part numbers. The "S" APs somehow could not join the WLC. Please su...
Hi!Is it possible to use the HWIC-2FE module into the 1841 SEC/K9 bundle? Using the online Cisco Dynamic config tool, HWIC-2FE is not listed as an option when you select the 1841. Does it mean that this configuration won't work? Thanks very much f...
Hi Martin!Thanks very much for the prompt answer. Harold is my colleague and so far, we have been able to view only "Search Rejected Connections Only" but for other Messages it yielded no results. Why is this so? Thanks very much again for your k...
Hi Giuseppe!Bon Giorno!Thanks very much for your helpful insight on the number of realistic Static routes that can be supported on this switch. Sharing your experience with multilayer switch is just what we needed. Appreciate the link that you prov...
Hi John!Thanks for your answers. You are correct, the proxy server is 10.10.10.2 and that I'm applying it in the inside interface; I have the same line for port 80. "You could try to allow all out port 443"Could you please elaborate further on how ...
