Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a 5508 that has just been upgraded from 7.0.240 to 7.6.100 with many 1142's, 3502's, etc. Our wired network is HP 5406zl's POE on every port and plenty of power available for POE. As soon as we upgraded our 1142's to 7.6.100 we started gett...
I have have 2x 4404's (2x) and 2x 5508's all are running 7.0.240.0. When I take an 1142 and associate it to a 4404 I can connect a test client using N at 144Mbps and I can get transfer rates averaging 70Mbps (using iperf tests). When I take the same ...
TAC has resolved the issue. We issued the following comand to disable MPDU:config 802.11b 11nSupport a-mpdu tx priority all disableFor some reason that had been disabled on the 4404 long ago (possibly 9 years ago when the vendor was on site assisting...
Well, your question prompted me to test first the a/n antenna (5ghz?) disabled on the AP:- When AP is on 4404 I get 50+Mbps, when connected to the 5508 I get 2MbpsThen I tried enabled only the a/n antenna, and disabling b/g/n:- I got 70+Mbps on both ...
