Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Can I link ACS Express directly to Microsoft Active Directory since ACS Express 5.0 is running on Linux Platform.If yes, Do i need to installed agents on AD Server to talk to ACS Express ?
Hi,How do i enable multicast traffic into a VLANs from other VLANs ? I have configured point-to-point routed links between 2 catslyst 3750 switches. (multicast source)VLAN 10 ----Routed link-----> VLAN 11 (multicast destination)I have enable:ip multi...
Hi,My first thread. I have encounter some incompatibility on catalyst 10/100/1000Mbps POE switches.My POE Device (PD) cannot be power up by 3750G (PSE). Found out that 3750G uses phantom power on pin 1, 2, 3, 6 which is IEEE 802.3af Our 3rd party PD ...
Hello,Anybody there ? Has anybody used Cisco ACE Express 5.0 before ?Can it linked up to AD directly ? Or an agent is required on the AD server ?Thanks
Thanks for the reply. In fact to make it clearer, there will always be multicast traffic in both of these VLANs. I have tried it out in my lab, but i am unable to receive any multicast. What could be an issue ?What does no ip mroute-cache meant ?
Whats your CNA version ? Get the latest. 5.3http://www.cisco.com/en/US/docs/net_mgmt/cisco_network_assistant/version5_0/release/notes/OL12210a.htmlEnable CDP.
What i meant different switches are different physical switches irregardless of models. Yes you can use cross cable to create VLAN trunk or L3 links. But if you want to use etherchannel across different physical switch, it cannot be done unless you u...
