Hi, you can filter routing updates only on ABR and ASBR. This is because in link state routing protocols, the link-state database should be the same for all routers in one area. So you have only 1 area, you have no chance to filter routing updates.Bu...

Hi, First your class-map:class-map match-all shob-stations1match source-address mac aaaa.bbbb.ccccmatch source-address mac aaaa.bbbb.ccccis wrong. You cannot have a packet witch comes frome two hosts at the same time. Your class-map must be match-any...

I think you did not understand me right. The bandwidth command under interface configuration mode is not related to your actual bandwidth in any way. It is only for purposes of QoS and EIGRP. The shaping is part of QoS. You can use it to limit the ac...

Yes, you can do shaping regardless of your ISP.  The bandwidth command under interface is not used for actual configuring the bandwidth of the interface. It is used for other purposes for example EIGRP metric calculations. It is also used for QoS if ...

Hi, bandwidth statemant is for upload traffic and is configured like thispolicy-map QOS class QoS    bandwidth 512the value in the bandwidth statemant is in kilobits per second, and it is the bandwidth that you want to guarantee to your host. For dow...