Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
This is also a problem on 8.3.143.6 and likely other versions as well, however the workaround does not work at all. I have tried every combination of enable/disable snooping, and cannot delete any strings nor can I delete the default-mdns-profile. I ...
Grep works a little odd compared to Linux, but it works to filter many things.
(wlc) >grep include Not "show ap join stats summary all"
Press any key to continue..y
18:8b:9d:dd:a7:60 18:8b:9d:e3:5a:b0 r039-ap003 10.24.209.22 ...
Hey all, I have a project coming up where we were going to replace some aging 4402 WLCs with 5508s running newer, 7.4.121.0 code (possibly even newer). Due to costs we were considering leaving the 1252s in place until we decided on 3602i/3702i, but 1...
I was able to delete the strings by executing "
clear mdns service-database all first. Trying to expire records from the database by disabling snooping, and rebooting WLCs doesn't work oddly - so perhaps it is being 'touched' or held in some other wa...
You must have Global mDNS Snooping enabled if you want the WLC to be the Bonjour gateway. If you uncheck global snooping, then it just lets all multicast traffic across. If you choose to participate in snooping, then the WLAN also has to participate ...
Make sure to check "show sys info" after they reboot and get back into HA state. I've done clustered FUS upgrades and sometimes the second one doesn't take, FUS takes a good long while, around 28 minutes as I recall. Its generally recommended to brea...
