Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am using a PIX 501 between my internal network and the outside world. I have an AXIS web cam connecting to the the outside via NAT, Everything has worked perfectly until a couple of months ago when outside users could no longer connect to the AXIS....
Four years ago I purchased a 501 to protect my home network. I bought the Cisco because of their reputation and that's what my employer uses - not because I knew how to program them or how to really use them. It's been silently working fine since the...
Please understand that I am nowhere near being a network guru and I'm even farther away from being a PIX guru.I have a 501 PIX between my home network and the outside internet. The PIX is connected to a cable modem and pretty much keeps the same DHCP...
I finally bit the bullet and upgraded my OS from 2K to XP Pro. Now I find that I have a certificate problem that I would like to fix. The error message tells me I have a mismatched address. I know very little about the inner (or outer for that matte...
I have a 501 with the 6.3.4 os. I had set up a logging host thusly: logging host inside 192.168.1.4It was working fine but I needed to change the IP address of the logging host. I thought if I just entered the same command but with the new IP it woul...
Thanks for the reply. The 209 address is the IP Comcast assigns to my cable modem. It is a dynamic address but it has had the same one for 2-3 years, It did change back then but I was able to quickly determine that it had changed, updated the NAT wit...
I will be coming in from different IP's at different times but I would appreciate it if you could show me how to do that for a learning exercise. About the only way I can learn anything is to do it and since I had to make this change I've learned a b...
Well, this seems straightforward enough but for some reason I am getting the following error when trying to enter the access-list command (exes used instead of actual address:Result of firewall command: "access-list 100 permit tcp any xxx.xxx.xxx.xxx...
