Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,we need to establish an PPPoE client connection on one of the switched LAN Ports on the ISR1100 with IOS XE. But it will not work. The same configuration on the routed WAN Port does work. ## PPPoE over routed Port is ok:#!Interface Gi0/0/0!Interfa...
Thank you but where shoudl I put the "pppoe ..." config if not in the "Interface Vlan" section? I've tried it in the "Interface Gi0/1/3" section as well but that also does not work.I know that we have had the same issue on the 800 Series some time ag...
Hi Marco,thx, I found so many 3G/cellular examples which don't wait for the CONNECT string but now I'am a little bite more sensitized concerning the use of AT commands .--Gerald
(probably solved)After some more time of testing and debugging it seems to be a timing problem. When changing the chat-script from!chat-script GSM "" AT OK "ATDT*99*1#"!to!chat-script GSM ABORT ERROR ABORT BUSY ABORT "NO ANSWER" "" AT OK "ATDT*99*1#"...
Hi,I have not an solution but rather a similar problem with that kind of hardware (881GW with PCEX-3G-HSPA). I have a working config for only *one* successful 3G dial-in: after losing the established 3G connection (e.g. forcing a "clear int dial 1"),...
