Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello!I have some problem with configuring vrf aware Ipsec (Crypto Map).Any traffic (from subnet 10.6.6.248/29) do not pass trouth router, but if i run command "ping vrf inside 10.5.5.1 source gi 0/1.737" it working well. Configuration below:ip vrf...
hello !I resolved this problem.It is no Bug.In this ip route vrf inside 10.5.5.0 255.255.255.0 GigabitEthernet0/0.806 10.10.10.100 track 1010.10.10.100 must be changed to next hop gateway for f-vrf.After that show ip cef vrf inside 10.24.1.0/24 inter...
>> Additionally, here's a guide which goes through some of the configuration and troubleshooting for VRF aware IPsec: https://supportforums.cisco.com/document/51931/vrf-aware-ipsec-cheat-sheetI built my config on the basis of this post. Pre-tested on...
Hello Frank! >> 1. You may want to consider removing the "track 10" from your static route to eliminate any issues that this could be causing.I tried it before. Nothing changes.>> 2. If you teardown the tunnel, can the traffic from your end client (...
Hello,1. "ip wccp web-cache redirect in" It would work if you squid proxy have another default gateway to internet. Otherwise the traffic from the SQUID is also forwarded. You have to use different interfaces for users and squid. On sabinterfeyse vla...
