Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Just a simple question involving NAT and end-user Cisco routers (like the 800 or 1800 series). If my internet provider grants me one static IP address, and I have to NAT an internal private subnet, I make an ACL and nat the whole subnet (in this exam...
Hi there,I need some help on an issue with a couple of Aironet 1250 (AIR-RM1252A-E-K9). I got these as working as a gift, and I'm willing to make them work.I tried booting them up, both without success. I tried a standard 802.3af PoE switch, then a C...
I see your point, but the world is BIG and ISPs have different operations, and customers use different technologies.In my experience, I use Cisco 1801/1841 in a failover configuration - my ISP let me use a WAN high-speed access, if the PPPoE session ...
Single port translation sometime it's not an option, my question was just because of that (eg when the customer has a firewall and needs the static NAT of the public IP on the firewall's WAN interface).
I've managed to get my hands on 2 more of those APs. Now I have a grand total of 4 APs that behave exactly the same - it's quite strange to have 4 same exact fault. I'm trying to get a 56V PSU, I'll see if anything different with that.
Is that the only character you see even if you press any characters? Yes. I also tried playing with the "mode" button as instructed for the password reset procedure, but didn't do anything.If the line protocol is coming up then your console ter...
