Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am curious as to what you all are using for location tracking? I have WCS already in place...Is the location add-on for it the way to go or is something else such as the Ekahau system better? Also, what are you using for tags? Ekahau, AeroScout,...
I am trying to migrate my controllers back from 5.2 to 4.2 code. If I have an AP associated to a 5.2 controller, I can change its configuration to point to a 4.2 controller, create an access list so that it can no longer see any of the 5.2 (CAPWAP) ...
After having lots of issues with 5.2.157.0, TAC is suggesting that I use 4.2.176.0. I have 6 production 4404s and 1 test 4402. I have wiped the config on my 4402 and loaded 4.2.176.0 code. I want to test all of my applications before trying to mig...
I have a strange reoccurring problem. First some background on how we are setup. I have 6 4404 WLCs each licensed for 100 APs. They are all running version 5.0.148.0 configured the same using WCS version 5.1.64.0. Each have 7 WLANs defined. One...
Does anyone know if I can pass parameters to the Upgrade tool so I don't have to type in the same information every time I run it? Especially since you have to close and re-run it each time due to Cisco documented memory leaks!! I have 300 1120s to...
Have any of you had any issues with NAT and the new upgrade? I know that NAT has been totally rewritten and it is suposed to convert them for you. I however have hundreds of Static Policy NATs to support many LAN-2-LAN VPNs. I am a bit worried abo...
The short answer is no, I did not solve my problem. I assumed this was a 5.0.148.0 bug so I upgraded my controllers to 5.2.157.0. This caused me worse problems (search the forums for dbuttry) so I downgraded everything to 4.2.176.0. After lots of ...
I had a similar issue. Remove the card and then go to device manager and delete the network card from there. You may have gotten a windows driver loaded for it somehow. Then start the software and then re-insert the card. This fixed my problem. ...
What version of code are you using? I had a similar issue running 5.2.157.0. One of my controllers would just reboot about every 1.5 hours or so and another once or twice a day. Found out that I was hitting bug CSCsx19599. Here are the instructio...
