Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everybody.My organization is composed of two buildings connected together with a PtP wireless bridge solution.In the main building there are several offices of two business units that works in two different VLAN (id 10 and 20) and a guest wirel...
I made a simple test: I've moved the server room's switch into the main building, connected to the same trunk port. Plugging an UTP to a port in VLAN20 my notebook was able to get an IP from DHCP and to browse the internet, so my problem isn't relate...
Sadly the SG200-26 doesn't allow Telnet login, I can only manage it through the web interface, so I guess I can't type the sh int trunk command.Anyway I'll update the discussion as soon as I can make the test I've wrote above.
That's right: I haven't talked about that 1841 'cause it's not the default gateway. Since VLAN20 is a Callcenter, that 1841 is used just for voice traffic, and it's not my work.In the server room I can't browse the internet, even with a static IP ass...
I don't have any 1841 router: my VLAN20 default gateway is a Zyxel USG20 connected on an untagged port on this vlan.As i've wrote above, there is no need for intraVLAN routing: each VLAN have to stay apart from the others.I know it's a strange setup,...
Hi Mark and thank you for your answer.I've attached the main SF300-24P running config, but there isn't any internet access problems from it (the other switch SF300-48 is uplinked to this and has about 40 PCs connected working in VLAN20)There are laye...
