About Lf379

Lf379 · 01-10-2020

Hi. I bought a ISR 1111-8p for testing and i want to set the wan port with this parameters PPPoATM (or PPPoA or PPP Over ATM);VPI=8; VCI=35; encapsulation VC-Mux (sended me by ISP)I want to apply these commands taken herehttps://www.cisco.com/en/US/d...

Lf379 · 01-11-2020

Yes, dlink router use 192.168.1.0 network. I will use another network address for the default vlan 1.Thank you.

Lf379 · 01-10-2020

Also the host are connected to internet. Thanks a lot !!! Only a step is not clear, not works and i skipped it. This : interface Vlan1ip address 192.168.1.0 255.255.255.0ip nat inside

Lf379 · 01-10-2020

Hello,ok, with ip address dhcp the router is connected with the internet ( the ping to google.com answer accurately ) Now it needs of the Nat. This is the show run Current configuration : 4510 bytes!! Last configuration change at 21:52:51 UTC Fri Jan...

Lf379 · 01-10-2020

I have a modem dlink and i want to connect the Cisco router to internet through the wan Port.I can't to find the way to do this.

Lf379 · 01-10-2020

I have only 8 Port GE and 2 Port WAN GE

Member Since	‎05-21-2016 02:03 AM
Date Last Visited	‎05-03-2023 03:38 PM
Posts	6

User Statistics

User Activity

Cisco router ISR 1111-8p set wan port

Re: Cisco router ISR 1111-8p set wan port

Re: Cisco router ISR 1111-8p set wan port

Re: Cisco router ISR 1111-8p set wan port

Re: Cisco router ISR 1111-8p set wan port

Re: Cisco router ISR 1111-8p set wan port