Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Ok community, I have an interesting issue. I'm attempting to move my guest network from the Meraki NAT to a bridged VLAN config (the reason for this is because Meraki NAT routes the traffic out through the management network to the internet, which o...
When taking a PCAP, I'll have the default 60 seconds for the length and wish to download to open in Wireshark. Most of the time, these pcap's download to my pc with seconds while the web interface says it's still in process, and the pcap file is not...
I have a bridged SSID with a tagged vlan. DHCP is configured on the Meraki and it's handing out addresses with a local DNS server that's a Windows DC. DHCP is configured with option 15 and the text lists our domain name.Domain joined windows device...
In a previous life I was running Meraki APs with Cisco switches and we set the AP ports on the switches to trunk and portfast. I now have some MS switches and Meraki APs and I don't see the portfast option on the config. Should I disable RSTP on th...
I can't speak for the MR46's, but I have about 20 of the MR44 deployed in my organization. Environment is pretty open with low to medium density and they've shown to have great range and handle the traffic very well.The price vs performance differen...
I second the client load balancing, depending on the environment. If you have an open space with quite a bit of overlap, this setting seems to cause more problems than it solves.
We have a few older Surface Pros and they are a bear with the Meraki MRs. We had to update the firmware, and download the newest drivers and install manually outside of Windows Update. All the while our HP laptops and iphones were humming along perf...
I understand that's the easy route here, but I'd like to have this vlan cut off completely there and on the swtiches. I'm just trying to de-mystify the splash page. If I turn off the splash page, the vlan works well. Internet only and it's complet...