About schleefski

schleefski · 07-11-2023

Hi all,As far as I know, for regulatory reasons, it is necessary to create a separate organization at https://account.meraki.cn/ for locations in mainland China.I have a customer who runs several sites in China and connects these to Europe via MPLS. ...

schleefski · 03-23-2024

Hi,you can also check if your carrier provides another APN that‘s not behind a CG-NAT and change your cellular gateway to it.This way you don‘t need to configure any manual NAT traversal rules.

schleefski · 03-07-2024

Hi,it‘s a Firewall. You can create interfaces on it for routing and use those for talking to internal services.Take a look here: https://documentation.meraki.com/General_Administration/Monitoring_and_Reporting/Syslog_Server_Overview_and_Configuration...

schleefski · 03-07-2024

What could be possible is that dhcp snooping is enabled and not trusted on the AP port…I‘ve had DHCP issues with all kinds of Meraki APs (Catalyst 916x aswell) by not allowing „all vlans“ but instead only allowing the specific SSID VLANS on the switc...

schleefski · 03-05-2024

Hi,if you want to achieve a good rf design (it's not all about signal strength) you should consider talking to a wireless consultant which can do a professional wi-fi site survey. Here is a pretty nice Meraki documentation page covering all important...

schleefski · 03-02-2024

Hi,so first of all - it sounds like you are using Non-Meraki VPN instead of Meraki Auto-VPN. Can you confirm that?Having identical VLAN IDs/IP Subnets on both ends is not a problem as long as you don‘t route them into the VPN tunnel.Can you provide a...

Member Since	‎06-19-2024 02:24 AM
Date Last Visited	‎03-24-2026 01:01 AM
Posts	15
Total Helpful Votes Received	20

User Statistics

User Activity

Options for a Chinese Meraki Site

Re: NAT type unfriendly

Re: Internal IP address of our Meraki FW

Re: Meraki AP & Radius Integration

Re: Access Points Coverage

Re: Site-to-site VPN issue inconsistent connection