Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I write here to see if some kind soul can not solve my problem (which is common to seeso many people around the world).problem:I have a mail server (192.168.1.17) configured static NAT because it is accessible byPublic IP (PPP.PPP.PPP.PPP). Everythin...
Using CCP 2.6 (on Cisco Router 1941 with IOS 15.2.(2)T1) to configure Anyconnect VPN I discovered 3 bugs:1) When delivered to router the pre-compiled (created from wizard SSLVPN) make error on line "svc address-pool nameofpool" and obviously vpn is n...
from 10 days i'm not able to download any file (drivers, bios, etc.) from support.intel.com with router 1801. i'm yet try to disable any access-list and firewall policies.... but not solved this problem. With other router from cisco (837 for example)...
After days of study and research have been able to produce this configuration.interface GigabitEthernet0/0 ip vrf forwarding black ip address 192.168.1.250 255.255.255.0 ip nat inside ip nat enable ip virtual-reassembly in duplex auto speed auto no c...
This not a working solution.....Jun 14 21:00:36.403: %IP-4-DUPADDR: Duplicate address 192.168.1.17 on GigabitEthernet0/0, sourced by 0015.5d01.4605ObvioslyThanks for answer.....
I would not use the internal IP (192.168.1.xxx) on mobile devices because otherwise every time I have to change the server address when connecting to mail server via the wireless office network (192.168.1.x)Sorry for my answer in Italian........
@rizwanr74:I know the problem that affects the DNS, in fact, I specified that I try to reach (from the internal network 192.168.1.xxx) public IP address (PPP.PPP.PPP.PPP) and not the address if (cname) public .Messaggio modificato da Alessandro Spian...
