Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Can anyone tell me what these NAT statements are doing? Is this just a way of doing a NAT exemption between two interfaces?static (DMZ,inside) 172.22.8.0 172.22.8.0 netmask 255.255.255.0 0 0 static (DMZ,inside) 172.22.9.0 172.22.9.0 netmask 255.255....
I've reviewed the zero downtime upgrade documentation and it says that it is supported in several scenarios. The one most closely related to my upgrade is this scenario:You can upgrade from a minor release to the next minor release. You cannot skip ...
I'm wondering if anyone can tell me if I'm on track with this. First let me say that I don't know the FWSM at all (I know the ASA, but not this module). I am going to be retiring two old 6500 chassis which contain 2 FWSMs running in active / standb...
I'm looking at the datasheet for the WS-X6708-10G-3C at this link:http://www.cisco.com/en/US/solutions/collateral/ns340/ns517/ns224/ns668/net_business_benefit0900aecd805348f3.htmlIt says that the Supervisor 720 is supported, but doesn't give any spec...
Sorry for this OT post. I'm working to convert a CatOS configuration on a 4000 to IOS for a newer series switch (3700). My question is about a few QoS commands that I'm finding on the CatOS which I can't find enough documentation about to convert to ...
Thanks, Jon - that makes sense and clarifies things for me. I'm thinking that some of these statements are not really necessary (as you pointed out). I appreciate the response!
Thanks for your response. Yes, I have created the VLANs in the database (thanks for checking). And yes, I meant only a single SVI.So it sounds like I'm all good to go on this. Thanks again for your response!Joe
I second Collin's remark. I prefer to use L3 links between access and core, but L2 links can work fine depending on the size and topology of your network. If your doing L2 to the core, then I recommend taking Collin's advice on GLBP to take advanta...
Paul,You need to get a WAN simulator to perform the tests that your after. Besides doing some kind of "funky" QoS configuration (which won't accurately test what you are after), there is no way to do this from the command line.Take a look at the Shu...
Just to add to what Laurent said - you could also use VACLS (VLAN ACLS) / VLAN Maps to control traffic contained within a VLAN. Laurent's configuration example would work between VLANs.http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/softwa...
