About vgrig

vgrig · 07-24-2017

We installed and ASR1001-X to handle one of our dedicated lines and it's LAN interface somehow shows up as a hop to any hosts on that VLAN.ASR1001-X is connected to cat 6500 switches and if i clear arp on 6500 ASR1001-X hop disappears from traceroute...

vgrig · 01-06-2011

Greatings.I'm trying to configure Catalyst 4510R with sup-6E and 2 AC Power Sheves for total of 7500W available power.Shelves were already installed with 1 PWR-4502 PSs each, strapping kit between shelves was previously installed as well.sh power out...

vgrig · 07-24-2017

but that would disable it on ASR, isn't it? ASR talks to local subnet directly, not extra hops - it's 6500 that's having a problem doing that. and 6500 doesn't have arp leaning command. asr# traceroute 192.168.119.21Type escape sequence to abort.Trac...

vgrig · 07-24-2017

192.168.120.3also has a vlan 119 interface and it's a default gateway for all 192.168.119.x hosts - including asr router. look at : "sh ip route 192.168.119.x" output above - 6500 is drectly connected to that network. it shouldn't get any hops to hos...

vgrig · 07-24-2017

Yes, there is 'ip local-proxy-arp' interface config command, but that seems to be defaulted to "no" - i entered "no ip local-proxy-arp", but it doesn't show up under interface config afterwards.

vgrig · 02-14-2011

Inputs all are 220V/20A, but that doesn't matter - according to Cisco Support, switch can't tell how much power it gets from DC/AC shelfs, so the only thing to test it is to configure manually "power dc input 7500" and keep connecting PoE devices til...

Member Since	‎10-03-2006 05:40 AM
Date Last Visited	‎05-09-2018 06:19 AM
Posts	6

User Statistics

User Activity

ASR router shows as a hop in traceroute, but shouldn't

Cisco 4500 AC shelf 3+1 power configuration.

but that would disable it on

192.168.120.3also has a vlan

Yes, there is 'ip local-proxy

Re: Cisco 4500 AC shelf 3+1 power configuration.