About Sebastjan Kocelj

Sebastjan Kocelj · 01-27-2014

Hi All,I have the following scenario:CUCM (9.1.2) --- CONDUCTOR (XC2.2) --- MCU 4501 (4.4)My endpoints are registered to CUCM: - 9971 (9-3-4-24) - EX90 (TC 7.0.1)When I create AdHoc conference, I can see one video port is used. When another j...

Sebastjan Kocelj · 01-20-2014

Hi All,I am trying to check redundancy operation between my two VCS-Es version x8.1. The following is my scenario:2x CUCM ----- 2x VCS-C ----- 2x VCS-EI am connecting through VCS-E to register EX endpoint to CUCM (9.1.2) servers. Registration works f...

Sebastjan Kocelj · 07-04-2019

Well there are two places where you can present Calling Number and Calling Name.First is the Finesse, which you can do with SQL query inside the script as described above.Second is the devices (phones). Here you can use the easy way (CLID enable usin...

Sebastjan Kocelj · 01-31-2014

> set type=SRV> _sip._udp.phone.telekom.siNon-authoritative answer:_sip._udp.phone.telekom.si SRV service location: priority = 1 weight = 0 port = 5060 svr hostname = vcsemb.phone.tel...

Sebastjan Kocelj · 01-27-2014

Hi Oleksandr,So you are saying I need 4 different MCUs to support 360p, SD, HD, Full HD? That meens with clustered 3 MCUs, in total of 12 MCUs? And again if this is the case, then cascading is in use? So one participant is on one MCU, and another is...

Sebastjan Kocelj · 01-26-2014

I am removing the cable from primary VCS, and in the same time i am investigating what is going on on the endpoint. After couple of seconds, the endpoint unregisters. So the normal scenario should be, that the endpoint changes the SIP proxy to anoth...

Sebastjan Kocelj · 01-16-2014

Hi Daniel,The Order That CUCM searches URI table, is similar to DNs (directory numbers) and RPs (Route Patterns). Basically the CUCM will try to find the URI locally. If available it will send the call to the URI. If not found, it will try to find a...

Member Since	‎10-12-2005 05:25 AM
Date Last Visited	‎11-24-2023 12:52 AM
Posts	15
Total Helpful Votes Received	5

User Statistics

User Activity

Optimized Conferencing for Cisco Unified CM do not appear to work

VCS Expressway redundancy

Re: Also it will be worth looking

VCS Expressway redundancy

Optimized Conferencing for Cisco Unified CM do not appear to wor

VCS Expressway redundancy

Calls to VCS from CUCM for non-local domains