About Hanzni_2

Hanzni_2 · 08-18-2008

We have several switches on our lan and have two we recently put in. Our main switch is the VTP server with the domain Mesa. The two we recently put in have Mesa as well are are set as clients, but they are not pulling the vlans from the vtp server...

Hanzni_2 · 08-18-2008

Problem solved. They were using a 1000BaseCX Gigastack card on the interface and didn't have the stack looped. Here is a link to the device.http://www.cisco.com/en/US/products/hw/modules/ps872/products_data_sheet09186a00800a1789.htmlThank you all f...

Hanzni_2 · 08-18-2008

Gary and Matt,I think you're both onto something with trunking. All the interfaces are setup as trunks and encapsulation is dot1q, but if I do a sh int trunk the int they are connected doesn't show.

Hanzni_2 · 08-18-2008

Correct. There isnt a vtp password set on any of the switches. Sw1 shows:VTP Version : 2Configuration Revision : 9Maximum VLANs supported locally : 1005Number of existing VLANs : 11VTP Operating Mode ...

Hanzni_2 · 08-18-2008

I gave that a try and didn't work. This is a remote site I'm trying to help out. There is also an odd setup to this. When I look at sw1 (which is the vtp server) via sh cdp ne, it shows sw2 and sw3 plugged into g0/2. I don't know how that is, but c...

Hanzni_2 · 08-18-2008

Yes and no. One shows some stuff and the other shows nearly nothing.switch 2 shows:VTP statistics:Summary advertisements received : 22Subset advertisements received : 0Request advertisements received : 0Summary advertisements transmitted : ...

Member Since	‎12-10-2003 02:19 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	10

User Statistics

User Activity

VTP Domain the same, but not communicating.

Re: VTP Domain the same, but not communicating.

Re: VTP Domain the same, but not communicating.

Re: VTP Domain the same, but not communicating.

Re: VTP Domain the same, but not communicating.

Re: VTP Domain the same, but not communicating.