Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
at the moment the gateway has not yet been deployed and is not in active use. sh call history voice brief output on gateway is shown belowTelephony call-legs: 0SIP call-legs: 0H323 call-legs: 10Call agent controlled call-legs: 0Media call-legs: 0Tot...
Hi ,I am working with cme version 7, 7962 ip phone which has 7915 expansion modules. The modules are ok, but they dont display any data next to the buttons. However if you press the any of the buttons, the call goes through. however on the modules, n...
Hello,Have CUE version 7 with 5 mailboxes , I want to add cue-vm-license_12mbx_cme_7.0.3.pkg so that i can end up having 17 mailboxes total. been reading this document that exlains the process http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/r...
Hello,Wanted to find out if i upgrade my CME from its current version (flash:c2801-spservicesk9-mz.124-15.T10.bin) to version 4.3 will i loose the phone licenses in the process? I need to be able to support 7937 ip phone which the current version ca...
Hello,Wanted to find out if i upgrade my CME from its current version (flash:c2801-spservicesk9-mz.124-15.T10.bin) to version 4.3 will i loose the phone licenses in the process? I need to be able to support 7937 ip phone which the current version ca...
Hi,There are a couple of dial-peers being used apart from that one.. so after putting in voice service voip commands on gateway, the new error that i get is Cause code 47 is No Resources Available.....and the dial peer does get matchedJan 30 08:55:32...
