Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear All,We are attempting to run a traceroute from the Meraki Dashboard (Switching > Switches > Tools), but we consistently receive a "no data received" message.If this feature worked as expected, it would greatly assist us in troubleshooting issues...
Hi All,We have configured an SVI on the MS 425-32 core switch. A server is connected to the core switch (Port 24) using a fiber patch cord. We assigned a static IP address (10.0.18.8/24, VLAN 18) to the server.However, when checking the connected dev...
Hi all,I have the following queries before performing the Firmware Upgrade:1. I have planned to upgrade the Firmware of Meraki Access Points from MR 30.6 to MR 31.1.5.1 on March 6th, 2025. I have already received approval via email from our internal ...
Hello All,We have two MS 425 - 16 Core Switches and One MS 225 - 48 Access Switch. Both Core Switches are Stacked together.Our requirement is port need to be aggregated for redundancy.I will explain about how switches are connected each other in belo...
Hi @michalc1.,Thanks for your valuable suggestion.I will share the OS details once I receive them from our concerned team.Apart from these, is there anything else that needs to be considered?
Hi @Karsten Iwen,Thanks for your valuable input.I have checked with the Meraki Support Engineer, and they will carry out the activity to upgrade the firmware version of the MR to 31.1.5.1.We need to call the Support Engineer during the upgrade.Thanks...
