About XUEHAIWUYA1

XUEHAIWUYA1 · 11-06-2017

本帖最后由 XUEHAIWUYA1 于 2018-8-30 05:30 编辑总部VPN配置完成以后，客户端远程可以拨号到总部，但是访问不了总部内网，只能ping通总部网关，ping不通内部地址，内网地址是1.0网段的，vpn分配地支池是2.0段的ip local pool vpn 192.10.2.100-192.10.2.200 mask 255.255.255.0!interface Ethernet0/0switchport access vlan 4!interface Ethern...

XUEHAIWUYA1 · 08-15-2016

Now I have a 1832 wireless AP, the current wireless network’s working is normal, but can not access the web interface, I would like to reset the factory settings from the external.who can tell me how to do ?

XUEHAIWUYA1 · 06-07-2016

Cisco 1832i controller controls the wireless network, all of the AP interface on the switch are trunk? Configured with multiple SSID, divided into multiple VLAN.But now 2 SSID can not be connected, or can be connected but not to the address. The DHC...

XUEHAIWUYA1 · 11-08-2017

arvinjing 发表于 2017-11-7 15:58你的anyconnect 配置有两个地方配置错误1.没有配置隧道分割Access-list tunnel_split permit ip 172.20 ...你好，确实是nat的问题，已经解决了，现在可以访问内网了，但是还有一个问题，就是ping不通ASA本身的内部网关地址4.1，其它的4.2 4.3 等等都能ping通，难道是sslvpn不能管理防火墙本身吗？

XUEHAIWUYA1 · 08-16-2016

Oh! Thank you very much for your help

XUEHAIWUYA1 · 01-07-2016

guomizha 发表于 2014-9-16 09:57 这个文档还不错BRKEWN-2018 - Secure Mobility in the Cisco Unified WLAN Networks挺好的文档

Member Since	‎01-07-2016 12:45 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	4

User Statistics

User Activity

ASA5505 SSLVPN客户端拨号成功，但访问不了总部内网

The Web interface of 1832 wireless AP can not be accessed, how to reset to the factory default configuration.

Cisco 1832i controller controls the wireless network, all of the AP interface on the switch are trunk?

ASA5505 SSLVPN客户端拨号成功，但访问不了总部内网

Oh! Thank you very much for

无线认证方式详细介绍