Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Can anyone please advise. Two SSID's use the same VLAN on our network, devices have no issues when connected to one SSID and can break out to the internet. When devices are connected to the other SSID on the same AP they connect okay but it stated...
Hi,Can anyone please advise? when using NAT mode with Meraki DHCP can traffic still be tagged to use different VLANs. When testing we have noticed when the client IP assignment is set to Meraki DHCP traffic defaults to the native VLAN. We would prefe...
Hi,Can anyone please advise what is best practice and method for reserving a printer IP address on a Meraki switch(typically the printer would have obtained its IP address via DHCP off the router on site)?Thank you
Can anyone advise please the MS120-8FP switch we use is networked and live. Is it possible that we can connect a MS220-8P switch to it by network cable to establish network connectivity on it also. We have set both ports on both switches to the same ...
Hi,Can anyone advise please why the IP address of an AP is not changing to static when instructed within their web portal but shows within the switch page as the correct static IP address.For example within Wireless->Access Points->AP1 displays as LA...
Fantastic well done! you have sorted it just assigning the static IPs to the relevant APs. Much appreciated. For my knowledge why can't you tag the AP mgmt IP and have it native/untagged on the switch?
Yes it's the same VLAN we are using DHCP from, all the switches revert to static IP without issue but for some reason the AP's don't or don't reflect the change to static addressing on the relevant AP page.
