Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
One of my customers as a multiple Client VPN tunnels on a Pix Firewall, each tunnel as a restricted access only for some hosts. I would act in such a way that the remote client doesn't have internet and local network access directly while connected i...
I have create a MS CA whit a root Certificate 4096 bit, the result during ca authentication (PIX 515-UR v.6.3.3) is the following:CRYPTO_PKI: Error: Invalid modulus length in public or private key whileCRYPTO_PKI: WARNING: Unsupported certificate or...
The requirement is to mantain the limited access on assigned resources, from remote vpn clients to local network, but disable the access to internet and networks near vpn clients. In Pix v.6.3.5 is not possible (in my labs) set a split tunnel and red...
Therefore, if I plan an access-list with a specific net on a vpn and this net is included in an active route, the access-list has a greater weight. Correct?
The second one is not a route, but an access-list related to a VPN:>access-list 10 permit ip 172.30.0.0 255.255.0.0 192.168.1.0 255.255.255.0>crypto map newmap 10 match address 10
