Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a 3750E-24PD-E switch that I'm trying to create a stack with a 3750-48P-E. Whenever the new switch is attached and booted, it fails to join the stack with a "feature mismatch" error. I don't have anything configured (to my knowledge) on the ...
Hi,Anyone aware of any changes to RRM defaults or the RRM algorithm in 6.0.188.0 from 6.0.182.0? I re-read the release notes and don't see anything that seems relevant...I upgraded a couple 5508s over the weekend and have had 321 channel changes (70...
We are having the exact same issue, we were moving 8 AP's from a 3750 to a new 3850 and 4 of 8 failed in same manner, the Ethernet is Amber and Radio is green. No documentation shows this color code. There isn't even a red/green if we want to say t...
For the sake of the archives:The problem was the configuration of unicast rpf (ip verify unicast source reachable-via any) on the 3750E which isn't supported on non-E 3750 switches.'show platform stack compatibility' showed the incompatible configura...
Yes, you can download the autonomous image from (cco login / smartnet required): http://www.cisco.com/cisco/software/type.html?mdfid=281235915&catid=nullOnce you have an autonomous image you can follow these instructions: http://www.cisco.com/en/US/d...
No, there is no password transmitted during EAP-TLS authentication. EAP-TLS relies upon the authenticating client having a valid certificate with a name that matches an account on the authentication server. If you require two-factor authentication ...
