This features works with PIX 6.3.In Pix 7.0, It does not accept a tunnel group with peer 0.0.0.0Is there a solution ? (I need to upgrade an existing network with PIX at central site and IOS 83x routers at remote sites)thanks for your help
in chassis 6509 and lower all slots have 2 channels of 20GB for connection to the sup720.in chassis 6513, slot 1 to 8 have a single channel of 20GB, slot 9 to 13 have a dual ...This concerns only line cards. Not the supervisor. Sup720 has a capacity ...
Can you run site-to-site and remote access vpns together in PIX? yes.What issue do you have on the remote access VPN?What terminates your site to site VPN another PIX? a router ?You should remove :access-list 201 permit ip (Site-2-site remote site p...
Replace the defect unit, Reload the config, shutdown, reconnect all cables and restart.When the unit will restart, it will detect an active unit and start as standby.Force switch back to the main unit (failover active on the standby unit).Hope this h...
This does not work with FWSM 1.1.see caveat CSCdx91902 in release notes at http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/fwsm/fwsm_1_1/ol_3549.htm.This works well in current release FWSM 2.3.1.hope this help you...