Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I'm try to find MIB documentation for the oid 1.3.6.1.4.1.9.9.521.xI can find;1.3.6.1.4.1.9.9.520 is CiscoLwappCCxRmMIB1.3.6.1.4.1.9.9.522 is CiscoLwappDot11ClientCalibMIBbut not .521 branch I'm automating WPA-PSK updates via SNMP and I can see ...
I have several 1130AG LWAPP's running 12.4(13d)JA connected to a contoller running 5.0.148.2 SSID's are broadcast - usually no problem.However, I've noticed that several different vendor wireless cards cannot see both SSID's.Running a wireless captu...
For guests to be able to easily access our wireless network, the Layer 2 security is Open, with Web Authentication implemented at Layer 3.The problem I have is with having no layer 2 security (open), is that my dhcp pool is utilised by devices that m...
Is there a more granular way of enforcing Session Timeout for users on the WLC?When I use Cisco BBSM with my radius server, the session-timeout value is honored and I could set time of day restrictions within Radius for myt Guest users.However, with ...
I'm asking the following under the assumption that there must be more folks out there that have deployed Microsoft Live Communications Server and also use Cisco VPN??I have the following issue with our VPN clients. Using VPN Client 4.7 under Windows ...
I have this problem too.I'm adding the seed address as the vlan management address, however, after an initial dialog it then always tries to talk to the management interface - which i've set up as private vPC keepalive link (1.1.1.2 in my case).I gue...
The method I have used is;snmpwalk -c -v 2c enterprises.9.9.512.1.1.1.1.4This will return an index list of the SSID's that you have defined on the controller. Ie;SNMPv2-SMI::enterprises.9.9.512.1.1.1.1.4.1 = STRING: "Widget Inc."SNMPv2-SMI::enterpr...
Hi, there is a known issue with version 5.0 of WLC and timeout of the GUI. Checkout, http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Wireless%20-%20Mobility&topic=General&topicID=.ee6e8b8&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_locat...
Pushed out an Open WLAN, Aironet/MFP/WMM disabled. This means I now have three WLAN's on the same radio. 1) WPA 2) WEP and 3) OpenDid a network scan and was only able to see WLAN 1 (WPA). Packet capture displays that extended channel switch announcem...
We're still using WebAuth for the Guest SSID - we also enabled WEP due to DHCP depletion because of Open Auth.I'll try pushing a test open SSID and see what happens.
