Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
Is there anyone who can have a better explanation about the performance downgrade issue in the 2017 NSS report?
In the report, all the other vendors' product has fewer downgrade performance; but for Cisco FP 4110, the performance downgrade fr...
Hello all, Can anyone tell me that Nexus 7000 N7K-F248XT-25E module support 100M bps speed ?From the datasheet I don't find the answer, and as I know the standard 10G base T should support 100M bps connection.What I see when I connect to the 100M bps...
Hello sir,
I have the same issue.
Form the 2017 NSS report downloaded from Cisco web site:
https://www.cisco.com/c/dam/assets/offers/pdfs/NSS-Labs-NGFW-Comparative-Report-Security-Value-Map-SVM.pdf?oid=anrsc000899&elqTrackId=B685F60A2E5D08ECBCFCF...
I am using SIP trunk to SP (Verizon). I think maybe the issue for ip communicator is because I connect to the GW through VPN. My dial-peer is to the SIP SRST GW,and both sip and h323 are workable.
My topology is
Verizon SIP PSTN -- SIP trunk -- CUBE(...
Hi Sheraz,
It works now. I've tried several days for this issue, but finally I found all the setting is okay except the test method. I always use my ip communicator to do the test, and I don't know why, it just can get the complete destination digit ...
Hi Sheraz,
I will use the AA when router goes into SRST mode. I can hear the welcome audio well, and it will forward to operator if I don't enter any number. But if I want to enter 4 digits, it seems that only first digit will be collected.
I use G71...
Hi Sheraz,
Have you solved the issue? I have the same topology and user can hear AA welcome audio but cannot dial the destination extension number (it seems that the script only collect first digit). Thanks.
