About Marlon

Marlon · 06-06-2016

Hello Community I got a problem with getting my regions to work properly, respectively to select the correct codec. I've built a small lab with 4 phones, two device pools and two regions to simulate a main and branch office. The settings are as foll...

Marlon · 06-10-2016

I already tried to use a changed codec list, did't help. And there is only one node, so dbreplication can not be performed. I'll try to upgrade to 10.5(2)SU3a next week.

Marlon · 06-08-2016

Hi Leszek I did so, no change. Shall i try to create a new DP? To my mind it's not very reasonable as the config seams to be ok, but the CUCM just ignores it for some reason. Any idea, what could lead to such a behavior? Marlon

Marlon · 06-08-2016

Hi Leszek Yes, that's no problem, attached the file. I removed some devices, that are old and not used (and not registered) at the moment, from the output, except that its complete. For me, everything looks fine. Correct Bitrate, Correct Region/DB s...

Marlon · 06-08-2016

Hi Leszek I checked the settings, it should be ok, for reference please see the screenshots on top. I restarted the service and reset the phones, no change. I also tried to restart the whole server, no change either :/

Marlon · 06-07-2016

I'm sorry, missed that. 8145 --> 8141 @11:37:15 (G729 to Lab) 8145 --> 8140 @11:36:59 (G729 to Lab) 8145 --> 8142 @11:36:49 (G729 to G729) 8140 --> 8141 @11:36:34 (Lab to Lab)

Member Since	‎06-02-2016 07:52 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	9

User Statistics

User Activity

Issue with region codec selection

I already tried to use a

Hi Leszek

Hi Leszek

Hi Leszek

I'm sorry, missed that.