Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are a College and Lower School environment, on two campuses. At the College, a major effort is underway to use Apple TV, and iPads for interactive classroom work. The basic of users on iPads and connecting and sharing information through the Apple...
Sent from Cisco Technical Support iPad AppWe have a new install of OM3 fiber between buildings. Distance is around 600 FT. One one end is a 4510RE running cat4500e-UniversalK9-M, ver 03.02.00.SG (fc4). Connecting to line card WS-X4306-GB with a WS-54...
Sent from Cisco Technical Support iPad App:Have installed a 24 strand (12 pair) OM3 (50 Micron) fiber run between two buildings. The distance is about 600ft. One end is a 4510RE Core Switch with a WC4306 GBIC line card, using a WC5486-LX/LH GBIC modu...
I have configured about 20 of these switches now, and notice in the port listings a TE1/1//1 TE1/1/2 and GI1/1/1 GI1/1/2 uplink port. There are only two uplink SFP+ ports. I now have a reason to install with a 1Gb uplink to the Core. I am using a GLC...
OK.... Community... Please excuse my short rant!!! Cisco... You are driving me crazy this week!!!!I feel better now..... Have two new 3750X switches (24P-L, and 48PF) trying to stack. Brought them up together a few weeks ago with the 24P using LANBas...
All Combinations of TR/RX have been tested. All elements are as they should be, but still, no link. Am thinking of using a GLC-MM-SX module on the 3750 side. Just for giggles and grins. Those are usually the attempts that make it work. Go figure.Sent...
A follow up. It appears my image file has become corrupt, so now to delete/rename and load a new image file. However, does not explain the FIPS messages. If I am understanding what the FIPS relates to, both switches have identical messages.Sent from ...
Using a Windows DHCP, have you configured Option 43? We have found a need to set a temporary DNS entry for the controller so new APs can find it when they a brought online.Sent from Cisco Technical Support iPad App
Proxy was enabled on the 5508, but not on the 4404s which do work. Matched the 5508 to the 4404s but did not fix the issue. Authentication then deauthenticate or clients is also going on quite a bit.
Took a look and the correct primary and secondary addresses are in there. Strange it worked for awhile, then quit. No changes were made that would have caused that.Am curious: Could this relate to Option 82? We arer using Windows Server 2003 DCs ...
