Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
Reposted from Getting Started with Wireless:
https://supportforums.cisco.com/discussion/13152826/887vaw-dhcp-server-not-working-wireless-clients
I have tried to setup a 887VAW to have two vlans (USERS and MGMT) with both wired and wireless ...
Hello,
I am working on a CCENT training lab to demonstrate configuration of port security.
I have a Catalyst 3550 switch running Cisco IOS Software, C3550 Software (C3550-IPSERVICESK9-M), Version 12.2(52)SE, RELEASE SOFTWARE (fc3). I have two compute...
Hello again,
After further attempts, I have found that a windows client will work, but a Linux/MacOS client will not!
I read somewhere that the native VLAN has to be associated with the bridge-group 1 so I changed the VLAN assignments so the 10 = MGM...
Hello,
I managed to find how to debug - "debug ip dhcp server packet". Here's the output:
*Nov 8 07:22:37.428: DHCPD: client's VPN is .*Nov 8 07:22:37.428: DHCPD: No option 125*Nov 8 07:22:37.428: DHCPD: DHCPDISCOVER received from client 01b8.27eb...
Hello,
I thought I'd put some more information relating to the problem here:
If I do "show ip bindings" I can see the MAC address of my wireless NIC come up, so I think the DHCPDISCOVER messages must be getting through to the server, but the DHCPOFFE...
Hello again,
Solved! Thanks everyone for your help. Long story short, I loaded a different IOS image and it started working as expected. Details below in case anyone reads this in future.
I have access to an identical Cisco 3550 running the same ver...
