I have a customer with 3 WAAS appliances and a CM running WAAS 4.1.3a. The customer has lost their network engineer and they do not have the admin passwords. I can telnet to the CLI of all devices but I am trying to access the CM GUI and don't get pr...
Hi,My customer has bought a layer 2 WAN service from a service provider and already purchased 3750 switches to act as CE devices. They now want me to specify a design of how to implement what they have bought. They have about 50 sites but due to ...
I am trying to implement priority queuing (LLQ) on a pair of 10GE links between a 4507 with Sup6E and a 4948 which are configured as an etherchannel. I am unable to configure a priority queue on the 4507. I am running into the following issues:I wan...
I have a pair of CSS11501s load sharing to some servers running the Livelink application. I am able to configure a keepalive to the uri "/" on the servers to check that the IIS server is working but I have not been able to successfully check that the...
Giuseppe, Brian,Thanks for your responses. I understand that I can split the network into groups to avoid scalability issues related to the number of neighbors. There are, however, negative sides to this as well. All of the sites in the network are c...
The presentation is .1Q on each of the 2 physical interfaces. There is then a small provider-owned (non-Cisco) L2 switch at the site that marks the QoS and switches both types of traffic over a common uplink to a non-Cisco L2 core. The way it was exp...
I did some further testing. The problem is related to the police command being needed for a priority queue but not being supported on a port-channel member, even if the port-channel and interafaces are shutdown. If I removed the police and priority c...
