Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi my friends; I have question regarding throughput , let's say for example if I have 20M link, it doesn't mean that i can download 1 GBit file in 50sec, The throughput equation I've found is “Max TCP throughput = RCV buffer size / RTT =? bps “ · ...
Hi; R1 is peering with two private MPLS providers, Unfortunatily there is some AS number conflict between the two providers, and R1 want to act as a transit between the two providers, how can i remove the AS path from the provider when i receive the...
Hi Friends; Any one has idea what's going on in the belwo R1 | (BGP) |------------------------|R3---------------------R2| OSPF Area1 |R5-------------------- R4 OSPF Area 0-R1 is running BGP with R2 and R3-R2 is primary r...
-I've read in 3550 cisco documentation that " When the rate of multicast traffic exceeds a set threshold, all incoming traffic (broadcast, multicast, and unicast) is dropped until the level drops below the threshold level. Only spanning-tree packets ...
I wonder, why rate limit command is not functioning under routing enable gig interfaces in CAT3750 , I don't thing it's a SDM issue, Do you have idea why it's not functioning, Note.: I mean by not functioing that the command is accepted under the int...
Thanks Giuseppe; you meant by the 1st option is to filter this aggregate route from R3 and generate my own in R2? or to receive the aggregate from R3 and generate the my own using floating static?, But i beleive if i receive it and put it as a netwo...
Thanks Marwan for your answer, However i have one more question which is, If the aggregate route is also coming from AS400, in this case using aggregate in R2 will set the next hop to Null0 and R2 will not be able to reach R3, Is there a way to remov...
Thanks Milan; I think the 1st option is hard to be maintained as the two provider in this case should issue allowas-in in all current and conflicting sites VRFs, I don't know why Cisco don't offer as-override in the CE to make our live easier ? Anyw...
