Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have the following setup:1 MS120-24P --> 1 MS220-8P --> 1 MS220-8POn the MS120-24P is an IPTV broadcast center (BCC)On the MS220-8P are IPTV clients (smart TV and laptops with VLC)All IPTV nodes are in a separate VLAN100All...
Hi,After checking all formulas and documentation of Meraki, it is still not clear how it really works:ExampleMX100max 250 concurrent tunnelsMax 500Mbps VPN throughputLet's say, I have an SDWAN network with 84 tunnels on the MX100What is the exact thr...
I use a dedicated heartbeat/VRRP connection between MX nodes when the LAN network is not managed by us but by a 3rd party (i.e. the customer).The LAN is then an untrusted network with no visibility or management capabilities.The dedicated connection ...
Hi Bruce,My concern is the following:I have a primary WAN link and it is an IP MPLS connection (with an internet breakout on an exit HUB) and all VPN tunnels pass over itA secondary WAN link is a direct internet connection and active-active VPN is of...
Hi,I am wondering if the VPN tunnels between SPOKE and HUB are passing over IP MPLS VRF setup (no internet)And the HUB provides default route (exit-HUB).So if I want some local traffic to exit directly to internet, I would assume to have at least a s...
Hi,I finally got it properly working.changes I've made:igmp querier and BCC server in same vlan and subnet, Although the latter is not really a hard requirement, but better to do anyhow.More important and very obvious but easy to overlook, disable un...
SLAAC serves LAN subnets (i.e /64 subnets).Larger deployments /subnets, or dynamic WAN IPv6 assignment, benefits from DHCPv6 and RA.Look it from the pov of an ISP / MSPI think both should be possibleDo you agree?