About winstonlimsk

winstonlimsk · 02-07-2021

I have upgraded the CAT environment C3850 (standalone) and the Production Backup Data Center C3850 (stack) from 16.3.6 to 16.9.4 without issues. We have later decided not to proceed with Cisco Smart Licensing and wanted to downgrade to 16.6.8. We tri...

winstonlimsk · 02-20-2017

It has been quite sometime since I have configured a multicast network. Yesterday I tried configuring it on the Production environment but didn't work. We have the multicast servers connected directly to the Core Switch (x2) and I can see the switch...

winstonlimsk · 10-03-2016

Does the sequence of these NAT statements matter? I am using Cisco ASA 5510 version 8.0(3)19 static (inside,outside) 10.10.3.0 10.10.3.0 netmask 255.255.255.0 static (inside,outside) 10.10.3.102 10.10.3.181 netmask 255.255.255.255 Will the firewall ...

winstonlimsk · 02-08-2021

I do understand the concern. Prior to the upgrade/downgrade, we will inform our local maintenance vendor to standby. If unfortunately we do need someone onsite, we will alert the vendor to support. Note that these devices are located in Sweden and th...

winstonlimsk · 02-08-2021

Hi BB, Below is after issuing #request platform software package clean but did not reboot as I need to inform users in advance. I have also tftp the new bin to the switch. I understand that it is recommended to have at least 1GB of free space. From t...

winstonlimsk · 10-03-2016

Thanks for the quick answer.

Member Since	‎10-03-2016 12:17 AM
Date Last Visited	‎05-05-2021 12:47 AM
Posts	6

User Statistics

User Activity

Catalyst 3850 IOS downgrade

How to configure a multicast network?

ASA 5510 Static NAT

Re: Catalyst 3850 IOS downgrade

Re: Catalyst 3850 IOS downgrade

Thanks for the quick answer.