Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
helloi tried to upgrade in "INSTALL" mode from 17.03.07 to 17.09.05(I have no HA)all seems to be ok during upgrade (see attached) , bootvar seems ok :BOOT variable = bootflash:packages.conf,12;CONFIG_FILE variable does not existBOOTLDR variable does ...
helloI tried to change image from cat4500e-universal.SPA.03.04.02.SG.151-2.SG2.bin to cat4500e-universalk9.SPA.03.04.02.SG.151-2.SG2.bintry with ISSU or FSU but always have the same pbstandby reboot whith the new version but at the end of process cho...
Hello,thanks for your repliesI changed the register and reload but the problem is the sameBOOT variable = bootflash:packages.conf,12;CONFIG_FILE variable does not existBOOTLDR variable does not existConfiguration register is 0x2102c9800#sh version |...
thank you Leowhen you say "reboot", you mean active AND standby at the same time (otherwise it will happen the same problem), so with an interruption ?thanks Marc
HiWe found this in the Cisco VSS documentationPrerequisites to Performing ISSUThe type of the pre- and post-upgrade images must match precisely. Identical. ISSU is not supported from a Universal_lite to a Universal image, or vice versa. ISSU is also ...
HiYes I followed exactly this documentI tried again : issu changeversion bootflash:cat4500e-universalk9...and got exactly the sames messages :extracts :active :Apr 28 14:31:24.595: %SW_LEVEL-6-RESULT: Operational redundancy mode is UNKNOWN, due to s...
