Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,I'm facing an issue with some mobile handsets that connect to the internet to gather information from the vendor website (http tcp 80).I have CSG 5.5(14) configured in this way:!ip csg policy HTTP accounting type http customer-string INTERNET...
Hi all,I'm facing a very strange issue on CSG.I have ten 7609 each with 2 CSG configured in fault tolerance. The alias IP address in client vlan of these CSG is used as next hop by a load balancer (7606 with SLB),the traffic is passing through the CS...
I have a 7609 with a slb firewallfarm configured. It is running IOS 12.2(18)SXE3 with sup720. The firewallfarm is configured with default settings with no access parameter, only real servers configured. All the traffic is coming from a single vlan (i...
I have a 7609 with a slb firewallfarm configured. It is running IOS 12.2(18)SXE3 with sup720. The firewallfarm is configured with default settings with no access parameter, only real servers configured. All the traffic is coming from a single vlan (i...
Just for your information.I'm facing this behavior with CSG 6.7 as well.As far as I know CSG rel7x has a buffer in the server vlan, so OOO should be managed better.Regs,Ric
Yeah, of course.What is actually going on seems to be related to Out-Of-Order segments coming from the mobile handset.What the TAC is going to investigate is why without http accounting everything works.Regs,Ric
First of all you have to create vlans on switch-B as well.To use VTP you need to establish a trunk between the switches since DTP doesn't work with access ports.In this trunk, on switch-A side, there's written what are the VLANs allowed (suppose you ...
Here's an update. All destinations are affected, we also notice CSG arp errors:1.146.90.241 00-00-00-00-00-00 0000 LEARNED 0x8000 down(1)The CSG should use the next-hop mac address to reach remote destinations, I'm in doubt the fwlb is ...
Gilles,just to tell you my solution went in production last night and works perfectly.The only issue was I had to create another uplink vlan in which receive packets because of HSRP, in fact if you state replicate casa on the same subnet of the other...
