Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am a newbie to ASA configuration and need some assistance with configuring a rule to allow access to a particular site from inside our network. We have an ASA 5525 cluster and I need a configuration that will allow our internal network 10.26.0.0/16...
Greetings All, I have recently configured AnyConnect on an ASA 5525 for our corporate remote access solution. My manager, though, wants me to integrate some sort of soft token with AnyConnect and I have no idea where to start. Can someone point me in...
We have two firewalls. One is an ASA 5520 that allows internal customers to connect via VPN to the network. The other firewall is an ASA 5525 through many of our stores connect via EZVPN. Both the the VPN internal customers and the stores use private...
All, We have an ASA5520-K8 firewall through which internal customer connect and are given 10.26.206.0/23 IP addresses. They are not however unable to ping or RDC to each other. A co-worker and I both connected to the firewall and VPN and I tried to d...
Config as below and still unable to ping or http to external IP address. object network obj-10.26.0.0-02 subnet 10.26.0.0 255.255.0.0object network obj-reports host 198.38.xx.xxaccess-list Inside_access_in extended permit ip object obj-10.26.0.0-02 ...
I configured the following and still unable to access the site from inside our network. Also, I am unable to ping it. access-list Inside_access_out permit ip object obj-10.26.0.0-02 object obj-reportssiteobject network obj-10.26.0.0-02 subnet 10.26...
Here is the output. Which access-list that is bound to my inside interface? Firewall# show run access-group | in insideaccess-group Inside_access_in in interface insideaccess-group Inside_access_out out interface inside
Our current remote access solution is utilizing SecureAuth and LDAP. Now we are using a seld-signed cert but still need to add a soft token. I am a complete newbie to the ASA world, so please forgive the stupid questions. Is Duo Security expensive?
