Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I'm not a SW engineer, but my neighbor brought me a Cisco air-ap1815i-e-k9 AP to configure for him.I connected the device to a PoE switch and it started blinking green.My main router/firewall is pfSense, so I found the device's IP address in DHCP ...
Maybe I'm doing something wrong, but that's my problem, I have to learn the [email protected]'s password:
AP5C71-0DA3-4810>enable
Password:
AP5C71-0DA3-4810#
Exec mode commands
ap-type Set the access point type
archive Arc...
hmmshow ap summary
^
% Invalid input detected at '^' marker.
AP5C71-0DA3-4810>
Exec mode commands
enable Turn on privileged commands
logout Logout out from CLI
ping Send echo messages
show Show running system in...
I don't want to make light of the situation, but sometimes a person can be far from the AP, can work remotely. The only option is to work in a network environment.As I was already answered.One device has 2 IP addresses. One IP is for the AP and the o...
I would be interested in one more thing, which is partly related to the topic.After a few days I connected the AP to the LAN and in the DHCP leases I only see the IP address 192.168.1.14.Neither in the ARP table nor in the DHCP leases did the IP 192....
