Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I need to filter a url, (An url public and private), but the acls is not worknig#############################################interface e1 bridge vlan 2#############################################circuit VLAN2 redundancy ip address 172.19.2.102 25...
HiWhen I configure a POS interfaceinterface POS2/0 bandwidth 155000 ip address 187.128.9.14 255.255.255.252 encapsulation ppp clock source internal pos framing sdhand in the SDH network i do a logical loop, then the console router does not respond.Wh...
I have a CSS11501 with a SSL module, it is balancing two oracle AS, but if I try to access the application via http i can get a file (like a report) quickly but if I try to access via https the transfer of the file are very slowly. The app is interac...
Hi PabloThe ACL is applied like thisacl 26 clause 10 permit any 172.16.0.0 255.255.0.0 destination content ONE/PRIVATE clause 20 permit any 172.19.0.0 255.255.0.0 destination content ONE/PRIVATE clause 30 deny any any destination content ONE/PRIVA...
Hi pablo I want restate my questionI have a content rule like this one:content SSL-J2EE vip address 172.19.6.5 add service ssl application ssl advanced-balance ssl protocol tcp port 443 activeservice ssl type ssl-accel slot 2 ...
I have the group config like this:group GROUP add destination service serv1 add destination service serv2 vip address 172.19.2.50 active Im not clear about what your recommendation is? Thanks
Sorry this is the log172.19.2.50 -> 172.19.2.32 HTTP GET / HTTP/1.1172.19.2.50 -> 172.19.2.32 HTTP GET /favicon.ico HTTP/1.1172.19.2.50 -> 172.19.2.32 HTTP GET / HTTP/1.1
