About senthilmds

senthilmds · 06-23-2006

Hi All,i have two isp connected to my router, i have Multiple Nat pools using route maps.here is my router configip nat inside source route-map Nat interface Dialer1 overloadip nat inside source route-map Nat1 interface Dialer2 overload!route-map Nat...

senthilmds · 07-01-2006

Simon,it is not too complicated. it is my home network with two 128kbps internet connected. the problem is one ethernet interface, hence i use pptp tunnen to connect to the router and it becomes as a interface. rest the two wan connections are connec...

senthilmds · 06-25-2006

Simon,i have updated the post with my current running configuration, the roue-map for dialer-interface is for selecting the appropirate nat pools and xlate the address. the wan links are terminated in a single router. you could also use route maps f...

senthilmds · 06-25-2006

i have single lan you could ref the link belowhttp://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080093fca.shtmlmultiple nat pools to support address translation at the internal segment. nat translations timeout, doesnt work for...

senthilmds · 04-30-2006

HiIKE negotiation failure between your peers when OU fields do not match, This is due to the DN/FQDN mismatch between the crypto identity set on the peers and the ISAKMP identity sent by your peer.your can go through the below cisco document for refe...

senthilmds · 04-13-2006

Hibe specific with your nat ouside interface wheather it is one or two interface. has your inside interface is class B /16. use the below commandip nat pool test 10.11.12.13 10.11.12.13 netmask 255.255.0.0Thanks

Member Since	‎02-24-2002 05:00 AM
Date Last Visited	‎06-19-2018 10:50 PM
Posts	7

User Statistics

User Activity

WAN Load Balancing with 2 ISP

Re: WAN Load Balancing with 2 ISP

Re: WAN Load Balancing with 2 ISP

Re: WAN Load Balancing with 2 ISP

Re: what's that massage means:

Re: Many-to-One NAT configuration