Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have environment wlc 5508 and ap 702w 250 units config flex-connect mode
WLC Firmware 8.3.102.0
WLC IP:172.18.210.1
WLC and AP connect same site
wlc and ap same ip subnet and wlc enable dhcp for ap Work!!
I found problem many ap randoms disassocia...
My environment have WLC 5508 and ap 702w 250 units in my site. I need to config port all ap 702w example port 2 >> Vlan 20 port 3 >> vlan 30
Now i canfig one by one.
Please everyone tell me better way for config one time 250 units.
thank you a lot..
Dear K.Rasika Nayanajith
I have more information about Max retransmission count reached for Connection please see picture if ap not join to controller it can't ping to WLC but can access via telnet. (Left of the picture is ap join to controller can p...
Dear K.Rasika Nayanajith
i suspect about lan cable because some ap disassociated from controller and associated many time i tried change lan cable it work not disassociated from controller.
