Hello,I have a pix firewall that protects servers from the internet. Each server has local ip address that is staticly mapped on he PIX to Internet address.I wonder if PIX performance improves if I assign real ip addresses to the servers ?Thanks

Hello,I have two almost identical 3662 routers with HSSI card. "show buffers" shows me different buffers count for HSSI card on the routers. Those router that has lower value uses Normal particle pool more intensively and continuosly increases "throt...

Hello,I have a 3660 router with 6 connected E1. (3 NM-2CE1U).When E1, connected to controller 1/0 goes down (shutdown on remote end), I started to loose packets on E1, connected to controller 1/1.All controllers are configured equally:controller E1 1...

Hi,I have a 2611 with Ethernet/10M/full-duplex connected to catalist 1900 10M/full-duplex. I noticed that ignored errors are detected on the Ethernet router interface and their rate increased when traffic is higher. I tried to change cable, ports and...

I have a client on 192.168.151.0 LAN and VPN concentrator with static routes to 172.16.0.0/16 and 192.168.0.0/16 networks.When I start VPN dialer from the client it lose connectivity to local LAN. Is there any way to fix this?