Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an 1142 running in AP mode, and would like to convert a second 1142 LAP to AP. Is it possible to recover the image (c1140-k9w7.tar.124.21a.JA1) on the APand use this to upgrade the LAP?
Hello,I have created a new VLAN on a HP 3550 and use a 1941 router. the setup seems fairly straight forwardI have set the following configurationOn the switch -192.168.1.37 255.255.255.0 exitip default-gateway 192.168.1.1ip routingvlan 1 name "DEFA...
Hello, I am adding a barracuda VPN appliance to my network. The appliance must use a class B network (192.168.0.0 255.255.0.0) - and my current configuration is class C (192.168.1.0 255.255.255.0). I am confined to one IP address for the WAN, and ...
Hello. I am setting up a Barracuda VPN. Please take a look at the requirements and my config. Is this the best way to handle this task? Thanks These are the ports on the appliance that need access. It also states the GRE (IP protocol 47) In/O...
Hello Giuseppe,Thank you for your assistance. I have changed the ACL to permit all traffic, but still cannot connect to the internet from VLAN 2, I have attached the router configuration. Not sure what is happening here!!Best Regards, Roger
Thanks Justin, for taking the time to provide a very concise and detailed explanation...greatly appreciated. Most of the devices on our network are windows machines, and installing clients on all of them isn't an attractive option. We have server...
Hello Justin,Thanks for the explanation, I am trying to set up the access point as a local radius server to do WPA2/AES. I have been using the web interface, and these are the options I get. I'm a little confused because I dont see an option for ...
