About Spawn

Spawn · 08-27-2016

Hi, we have an upcoming dual 4500E Sup8-E installation in Easy VSS the os that is being shipped is with ip base licensing - IOS XE - cat4500es8-universalk9.SPA.03.08.00.E.152-4.E.bin http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/rele...

Spawn · 02-24-2011

Hi there,if anybody has encountered or worked with Cisco ACE 4710 and following scenario:ACE is configured with one virtual ip, for load balancing of a single server on different unique TCP ports.Its just like loadbalancing 2 physical servers but onl...

Spawn · 08-12-2020

when you want one VRF to talk to another in an ideal DC scenario we extend the VRF via separate VLANS and let a firewall or a L3 gateway to manage the inter vrf traffic. the problem i see is your L3 switch is already part of all VRFS, in a classic sc...

Spawn · 01-30-2019

Have you enabled QOS on the switch? By default it is disabled.

Spawn · 10-15-2018

may be bit different for dynamic ip address on the wan side, you cannot map it to one ip address with one to one nat, as it will keep changing on reconnect.check the documentation, wish i had that router to play around. Check - Assigning Dynamic DNS ...

Spawn · 10-14-2018

i think you have missed the NAT part.

Spawn · 02-17-2017

seems like nobody is following this part of the forum. ok with ip base there is a limitation of 1000 routes, so redistribution we have a controlled redistribution with only branch segments being redistributed. so it works. transit was blocked with o...

Member Since	‎07-04-2006 05:47 AM
Date Last Visited	‎08-12-2020 11:39 PM
Posts	13
Total Helpful Votes Received	5

User Statistics

User Activity

4500E Sup 8-E Ipbase OSPF Configuration Assistance

ACE Loadbalancing with Single Server and 2 different TCP ports

Re: VRF doubts data center migration

Re: Packet marking with Access-List

Re: RV320 Port forwarding issue

Re: RV320 Port forwarding issue

seems like nobody is