Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have an SG200-26 and unfortunately one of it's ports is connected to it a dumb switch. Whenever this dumb switch is disconnected and reconnected multiple things happen. 1. Port security kicks in and Dynamically locks the port even though all port...
We have a SG200-26. This dumb switch is connected to a trunk port of the SG200. This dumb switch has a couple of other switches that connect to it. Another dumb another managed. I know dumb switches aren't good but that's what I have been given and h...
This weekend I rebooted a bunch of network switches including our LAN SG200-26 switch. This I believe was my first reboot since upgrading to 1.3.2.2. After this reboot our Cisco Voip phones didn't connect anymore. After looking into this it turns out...
OK I'll explain my setupI've got a 3560 connected to an 1841 (router on a stick) but the trunk allows only VLANs 2-5. I didn't set it that way so I assume the previous owner did that for security reasons. Well some time ago we got an SG200-26P and w...
On my 3560 I was setting up an access list and transport to be used for my VTY lines. Previous owner of switch only had vty 5 15 shown in the config. VTY 0 4 was not in the config. So I set up an access list and transport on 5 15. I noticed that I co...
I disabled globally this weekend. And, and this bugs me, when I disabled it it reset the ports that Smartport macros run on back to VLAN 1. I had a feeling it would do it do I wasn't surprised. I then manually set these ports to what I wanted them to...
Also how do you disable port security? I'm hoping if I disable Smartport this won't still be a problem but if I pull the network cable between this switch and my dumb switch then port security will kick in. And I've adjusted the macro up to like 50...
What are the anti-macros I see in the source? I see that they have the options of turning off port security. Why is this here and when do these anti-macros run?
Thanks Michael and Aleksandra.I'm not gonna mess with altering the individual macros as Aleksandra pointed out the IP phone and desktop ones being buggy. I saw a post from a couple months ago you commented on Aleksandra.This brings up a question I h...
