Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys, I have a test PIX 515 here and I have just configured a logical interface as a VLAN. The switch can see the correct VLAN, and the pix can ping one host on the new VLAN, and vice versa, so the VLAN is operational.I am sitting behind an interf...
Hi guys, I am playing around with my home CCNA lab and want to set up some VLANS.I am using a 2950 switch and a 2501 router. My question here is, do I simply create a trunk on the port that connects the switch to the router and add the VLAN traffic o...
Hi guys, I have a Cisco 857W wireless ADSL router and I can get my windows XP w/s to connect but no IP address is assigned. I get a message saying limited or no conenctivity.Relevant config is:interface Dot11Radio0 description Wireless LAN no ip addr...
Thanks Rick, yes that makes sense, so if I had a router capable of trunking, and configured multiple sub interafces, then the commands above is all I need to do? In particular the native VLAN, is that allowed by default?Dean
